Cameras' Glass Covers - Kodak Ngenuity 9090DB Operator's Manual

2. Open the scanner's transport cover (see 1.4.1 Scanner Front,
and "Transport Cover Release Levers" on page 7)
3. Remove the bottom (back page) glass flat (see
4. Clean the new, bottom (back page) glass flat (see
5. Insert the new, bottom (back page) glass flat (see
The cameras in Ngenuity scanners contain a glass cover (not to be confused with the glass flat)
that protect the camera from dust and paper particles getting inside of it. They are located directly
beneath the glass flats, between and below the LED lamps.
The cameras' glass covers are part of the Optics group (see
Bottom or Back Page
Tray (as viewed from
top, left)
Glass flat removed
Bottom or back page
tray
C
AUTION
The cameras' glass covers should never be replaced. Do NOT attempt to remove a camera's
glass cover. They should be cleaned only.
72
"Cleaning Glass Flats" on page
"Cleaning Glass Flats" on page
"Cleaning Glass Flats" on page

5.3.3.2 Cameras' Glass Covers

Back camera's glass cover
LEDs
"Transport Cover" on page 7
"5.3.2 Optics" on page
Front of scanner
69)
69)
69)
68).
S008769 Rev A