Cover Led; Paper Jam Led; Misfeed Led - Kodak Ngenuity 9090DB Operator's Manual

When lit, the COVER LED indicator is yellow in color. It is lit when the scanner's
transport cover is open.
If this error occurs during scanning, pressing the CLEAR/RESTART pushbutton on
the control panel is required after the open cover is closed to restart the batch and turn the
COVER LED indicator off.
When not scanning, the COVER LED indicator identifies that the transport cover is open, but
pressing the CLEAR/RESTART pushbutton is not required to turn it off.
When lit, the PAPER JAM LED indicator is yellow in color. It is lit when a paper jam
occurs. The PAPER JAM LED indicator will light if the CLEAR/RESTART
pushbutton is pressed after a paper jam occurs, but the paper jam condition still
exists (i.e. paper is still covering one or more page-detect sensors).
To re-set (turn-off) the PAPER JAME LED, open the scanner's transport cover and remove all
paper debris from the transport. Close the transport cover and press the CLEAR/RESTART
pushbutton.
N
OTE
While scanning documents in rotary mode (straight pass-through feature NOT being used), do
NOT open the straight pass-through door. Doing so can cause a physical paper jam and a
paper jam error.
When lit, the MISFEED LED indicator is yellow in color. When one of the following
errors occur it will display a solid light:
• Skimmer Timeout: Skimmer is active, but the document to be scanned does
not move out of the feeder tray (commonly due to roller slippage)
• Feeder Jam: The document to be scanned is fed from the feeder tray, but does not reach the
scanner transport within the expected transit time
S008769 Rev A

2.1.4.2 Cover LED

2.1.4.3 Paper Jam LED

2.1.4.4 Misfeed LED

25