The Status area of the control panel consists of the
following LED indicators: POWER MODE; BACK DOOR;
MAINTENANCE; and MANUAL FEED.
The POWER MODE indicator uses an LED to indicate the various power states
(modes) or the transition between power modes. When lit, the POWER MODE
LED indicator is green in color.
The table below identifies the various actions of the POWER MODE LED depending upon the
scanner's power state:
Power State or Transition
OFF
READY
SLEEP > READY
READY/ACTIVE
READY > SLEEP
SLEEP
Once in SLEEP mode, the POWER MODE LED is the only indicator that will be lit; all others are
off (not lit) in order to reduce power consumption.
Depending on the current power mode, the control panel's pushbuttons perform different actions.
The table below identifies the functionality of the control panel's pushbuttons during the various
power modes and transitions:
18
2.1.1.1 Power Mode LED
Power Mode LED
Off
Blinking, fast rate
Blinking, fast rate
Steady
Blinking, fast rate
Blinking, slow rate @ 10% duty cycle
2.1.1 Status
S008769 Rev A