Kodak Ngenuity 9090DB Operator's Manual page 101

W T
ORD OR ERM
ADF
Ngenuity
Control Panel
DPI
Host PC
LED
MF
Multifeed
Optics
Paper Jam
Scan Source
Ngenuity Operator Utility
SharpShooter
NOU
Straight Pass-Through
USB
VRS Interactive Viewer
S008769 Rev A
D
EFINITION
Acronym used to refer to Automatic Document Feed.
Product (scanner) name.
Interface located on the front of the scanner that is used to perform
basic scanning functions and to signal scanner statuses through the
use of LEDs, pictograms, and text legends.
Acronym used to refer to Dots Per Inch.
Computer used to communicate with the scanner in order to scan doc-
uments.
Acronym used to refer to Light Emitting Diode which is the type of light
source used in the scanner, both for image capture while scanning and
illuminating indicators found on the scanner's control panel.
Acronym used to refer to Multifeed
Scanner feeds more than one document into the scanner at a single
time.
Term that refers to the following scanner components: glass flats, cam-
eras glass covers, sensors. This term does NOT include the scanner's
LEDs.
Refers to a single document that fails to pass through the scanner's
transport and exit into the output tray.
Refers to the scanner selected for use through the scanning applica-
tion on the host PC.
Utility that resides on the host PC. It provides and monitors scanner
connectivity, statuses and alerts, and allows Operators to set some of
the scanner's configuration parameters.
Refers to the technology found in the scanner's cameras
Acronym used to refer to the Ngenuity Operator Utility
Alternative transport path that allows scanning of thick card stock, ID
cards, etc. Documents enter the transport from the feed tray and exit
out the back of the scanner.
Acronym used to refer to Universal Serial Bus which is a connection
type used by the scanner to communicate with a host PC.
VRS enabled control window from which the Ngenuity scanner's
Advanced Features is accessed.
Glossary
89