Advanced Features; Accessing Advanced Features - Kodak Ngenuity 9090DB Operator's Manual

This section documents the Ngenuity scanner's Advanced Features. The controls for operating
the Advanced Features are accessible within the VirtualReScan
Ngenuity scanner's Advanced Features are:
• Multifeed
- Multifeed Mode (Notification)
- Enable Sensors
- Ignore by Size
• Document Setup
- Document Types
- Allow Large Skew
- Very Long Document
- Ignore Holes/Ragged Edges
- Front/Back Negative Image
• Advanced Color
- Camera Modes
- Camera Gamma
N
OTE
When VRS is NOT installed, similar settings will be found in your direct ISIS and TWAIN
settings.
Direct ISIS and TWAIN drivers compatible with Ngenuity scanners will be available at a later
date. Please go to the BBH web site (www.bbhscanners.com) to check for updates as to direct
ISIS and TWAIN driver availability.
In order to access the VRS Interactive Viewer, Ngenuity VRS Professional software must be
loaded on the host PC that the scanner is connected to, and be active.
VRS Professional will be active once the scanning application being used is launched and a VRS
scan source is selected. There are three types of scan sources, depending on the VRS driver
used.
S008769 Rev A

3.1 Accessing Advanced Features

Advanced Features

®
(VRS) Interactive Viewer. The
43