Getting Started; How This Manual Is Organized; Safety Guidelines - Kodak Ngenuity 9090DB Operator's Manual

The Operator manual for Ngenuity scanners is broken into various sections containing information
pertaining to the operation and maintenance of the scanner.
'Contact Information" on page ii
BELL + HOWELL Scanners (BBH). The next section called
the updates and changes that have been made to the manual since its last revision (Rev) or
release. There is also a section that details all of the various compliances on
Ngenuity scanners meet.
Please take a moment to register your scanner! Information on how to do so can be found in the
section 'Registration" on page
Throughout the manual important information in the way of operational, functional and safety
requirements is noted and identified through the use of special symbols. The section
You Should Know" on page xi
section "1.2 Safety Guidelines" on page 1
operation of the scanner.
Please review this document in its entirety before proceeding, paying particularly close attention
to the sections Symbols You Should Know
This documented is formatted for two-sided printing.
W
ARNING
Please read these safety guidelines before you operate or maintain the scanner and follow
them exactly. These safety guidelines are recommended for your safety and to extend the life
of your scanner.
• The scanner weighs approximately 112 pounds (51 kg). Be sure to incorporate the appropri-
ate manpower (taking into consideration your lifting capabilities) before moving or lifting the
scanner
• Make sure all electrical outlets are properly grounded. The use of a dedicated power line is
recommended
S008769 Rev A

1.1 How this Manual is Organized

lists the contact information for pertinent departments of BÖWE
ix.
in this manual offers definitions for each symbol. In addition, the
includes important safety information for the setup and
and Safety

Getting Started

'Release Notes" on page iii
Guidelines.

1.2 Safety Guidelines

lists all
page x that
'Symbols
1