Operating Environment - Kodak Ngenuity 9090DB Operator's Manual

Kodak ngenuity 9090db: user guide
Hide thumbs Also See for Ngenuity 9090DB:
Table of Contents

Advertisement

Do NOT lean on the scanner
Do NOT place any liquids near the scanner. Accidental spillage of liquid into the scanner may
cause severe damage. If this occurs, power OFF the scanner and unplug the power cord.
Contact a BBH Authorized Service Provider (ASP). A list of ASPs can be found on the BBH
web site at
www.bbhscanners.com
Ngenuity scanners contain Beam Class 1 LEDs. This class is eye-safe under all operating
conditions
Prior to scanning, remove all staples and paper clips from the documents to be scanned
Remove all jewelry or any other items from the hands and wrists that could become caught on
scanner components during operation and maintenance
Do NOT disassemble the scanner. Doing so will void your warranty. If there is a need to
disassemble the scanner, please contact a BBH Authorized Service Provider (ASP). A list of
ASPs can be found on the BBH web site at
Note to ASPs: Disconnect the scanner from its power source before servicing
The scanner equipment has been designed to operate in a normal office environment with
emphasis on the following:
Place the scanner in a clean, well ventilated room that is free of combustible vapors
Make sure all outlets are properly grounded. Use of a dedicated power line is recommended
C
AUTION
Due to the inconsistencies in power (i.e. power surges, spikes and ground noise), BBH highly
recommends the use of a power conditioner with all of its scanning products and attached
computer components. The use of a BBH recommended power conditioner eliminates the
degradation and possible destruction of sensitive electronic components, as well as any
disruptive events that can occur due to unwanted voltage between neutral and ground. For
more information, please visit our web site at
1-800-SCAN-494.
The minimum clearances stipulated in the following images
View-2 on page
4,
with approximately 4-5" (10 - 13 cm) of clearance at the front, back, and both sides of the
scanner for proper ventilation:
S008769 Rev A

1.3 Operating Environment

Top View on page
5, which can be found in this section) are allowed for,
www.bbhscanners.com
www.bbhscanners.com
(Side View-1 on page
or contact BBH Sales at
4,
Side
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ngenuity 9150Ngenuity 9090dcNgenuity 9125

Table of Contents