KODAK 6x6 Mobile Film Scanner Manual

Table of Contents

Contents

1 INTRODUCTION
2 SPECIFICATIONS
3 PACKAGE CONTENTS
4 SAFETY PRECAUTIONS
5 ASSEMBLY INSTRUCTIONS
6 OPERATING INSTRUCTIONS
7 APP INSTRUCTIONS
8 WARRANTY
9 Documents / Resources
- 9.1 References
- 9.2 Download manual

INTRODUCTION

This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty.
Please read all directions before using the product and retain this guide for reference. This product is intended for household use only. It is not intended for commercial use.
This product is covered by a limited one-year warranty. Coverage is subject to limits and exclusions. See warranty for details.

SPECIFICATIONS

Product type: Mobile film scanner
Assembled product length: 7.1" (18.0cm)
Assembled product width: 3.9" (9.9cm)
Assembled product height: 4.2" (10.7cm)
Packaging length: 9.1" (23.1cm)
Packaging width: 4.5" (11.4cm)
Packaging height: 1.6" (4.1cm)
Weight: 0.7 lbs. (0.32 kg)
Scanner box material: Cardboard
Glove material: Cotton
Light source: LED
Applicable media type: Color negatives, color positives, B&W negatives
Film size: 6" x 6" (15.2 cm x 15.2 cm)
Film types: 120 and 220 film
Power source required: Yes
Power source: 2 x AAA batteries
Batteries included: No
Location: Indoor use only
Installation required: No
Adult assembly required: Yes
Additional tools required: No
Country of origin: China
Warranty included: Yes
Warranty length: 1 year

PACKAGE CONTENTS

Cardboard scanner box
LED light panel
Pair of gloves User guide

SAFETY PRECAUTIONS

Please read and understand all safety precautions, operating instructions, maintenance, and storage instructions before operating this product. Store this manual for future reference.

Remove all packaging before using this product. Please keep all packaging materials out of reach of children and pets.
Properly dispose of all packing materials immediately after unpacking product, as the bags used for packaging could present a suffocation or choking hazard.
Do not modify, disassemble, or alter the product.
Do not expose or submerge the product in water or moisture.
Do not spill water or any other liquid over the unit.
Keep away from heat sources (ex. heaters, stoves, lighters) and direct sunlight to prevent heat buildup.
This product is not a toy. Keep out of reach of children and pets.
Do not drop, throw, or misuse the product.
Store the product in a cool, dry place. Do not store the product in a hot place or in direct sunlight.
Never handle this device with damp or wet hands. This could damage the device or create an electric shock.
Never place computers, televisions, or other heavy objects on top of the product.
Remove the batteries from the device if you plan on storing it for a long period of time.
Dispose of old batteries responsibly and in accordance with local regulations.
When replacing the batteries, change all the batteries at the same time.
Do not mix old and new batteries together.
This device is not intended for nor capable of developing film. Film must have previously been developed in order to produce negatives that can be digitized. Any images of film and/or film types are only to illustrate the various categories of film that can be digitized and scanned using this device.
DO NOT ATTEMPT TO DEVELOP FILM USING THIS DEVICE.
The device is not intended for any other purpose, nor for use beyond the scope described. No claims of any kind will be accepted for damage arising as a result of incorrect use. The risk is borne solely by the user.

ASSEMBLY INSTRUCTIONS

Remove all the contents from its packaging.
Unfold the scanner box. Press the slots on the lid of the scanner box onto the tabs on the top of the scanner box walls.
Remove the battery door on the bottom of the LED light panel.
Insert two (2) AAA batteries (not included) into battery compartment of the LED light panel. Then, place the battery door back on the compartment.

Place the scanner box on top of the light panel. Make sure to clip the scanner box into the light panel so they are connected.
NOTE: The light panel should be closer to the side of the scanner box that has the hole on the lid.

OPERATING INSTRUCTIONS

Please be aware that external light sources can generate unwanted reflections in your images. Keep your film scanner away from external light sources.
NOTE: This scanner is compatible to 120 and 220 film taken on a 6x6 medium format camera.

Turn on the LED light panel with the On/Off switch.
Put on the included cotton gloves before proceeding.
Insert your film into the scanner box over the light panel. Place the film on top of the light panel.
Download the Kodak 6x6 Film Scanner app from the App Store or Google Play. Then, open the app on your smartphone.
Select the type of film that you wish to scan in the app.
Place your phone flat on the lid of the scanner box. Make sure your phone camera is over the round hole on the lid.
Use the app to adjust the camera if needed. Then, scan the image when you are ready.
NOTE: After image is scanned, you can use the editing features in the app to customize your image before saving it.

APP INSTRUCTIONS

On the home screen, select film type between "Color Positive", "Color Negative", or "Black & White Negative".
From the different film type selection screens, you can adjust the appearance of the film with the slider.
Tap the camera icon to go to the Photo Editor screen where you can adjust the sharpness, contrast, exposure, saturation, and more.
On the Filter screen, you can give your image a different filter of your choice by tapping one of the selections.

On the Orientation screen, you can flip or rotate your image.
On the Crop screen, you can change the aspect ratio or resize your image.
On the Exposure screen, you can adjust the lighting of the image using the slider.

WARRANTY

LIMITED WARRANTY TO ORIGINAL CONSUMER
This KODAK 6x6 Mobile Film Scanner ("Product"), including any accessories included in the original packaging, as supplied and distributed new by an authorized retailer is warranted by C&A Marketing, Inc. (the "Company") to the original consumer purchaser only, against certain defects in material and workmanship ("Warranty") as follows:
To receive Warranty service, the original consumer purchaser must contact the Company or its authorized service provider for problem determination and service procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the Product is within the applicable Warranty period(s), MUST be presented to the Company oritauthorized service provider in order to obtain the requested service.
Service options, parts availability, and response times may vary and may change at any time. In accordance with applicable law, the Company may require that you furnish additional documents and/or comply with registration requirements before receiving warranty service. Please contact our customer service for details on obtaining warranty service: