Getting Started; Site Specifications; System Requirements; Registering Your Scanner - Kodak I620 - Document Scanner User Manual

2 Getting Started

Site specifications

System requirements

Registering your
scanner
A-61500 May 2010
Place the scanner:
• In a clean area with temperature and relative humidity typical of an
office environment,
• on a stable, level work surface,
• within 1.52 metres (5 feet) of an electrical power outlet.
IMPORTANT: Only use the scanner indoors in a dry location.
For more information about the scanner specifications, refer to
Appendix B, Specifications.
Following is the minimum recommended system configuration to run
Kodak i600/i700 Series Scanners.
NOTE: The actual performance of the system depends on the scanning
application, choice of scanning parameters, and the host
computer configuration. If the scanner is not performing at the
optimal speed, a faster computer and/or more RAM may be
necessary to obtain the rated throughput.
• Intel PC (or compatible) with a Pentium IV 2 GHz processor
• PCI slot
• 512 MB RAM
• Monitor and mouse
• Supported operating systems:
- Microsoft Windows XP SP3 (32-bit)
- Microsoft Windows Vista (32-bit)
- Microsoft Windows 7 (32-bit)
- For i700 Series Scanners only: Microsoft Windows 7 (64-bit)
It is very important that you register your scanner so Kodak can provide
you with the best possible service and support that helps maintain your
continuous scanning. Registering your scanner will help us provide you
with firmware and hardware updates as they become available.
The scanner must be registered before any service support can be
provided.
You can register your scanner's new equipment warranty online at
www.kodak.com/go/DIwarrantyregistration.
For more information about Kodak's service and support options,
contact your reseller of Kodak Document Imaging products or visit us
on the web at www.kodak.com/go/DIsupport.
2-1