Item
LED
2
Online
\Activity
Hot-plug drive LED definitions
Item
LED
1
Locate
2
Activity
ring
3
Do not
remove
Status
Flashing amber/blue
(1 flash per second)
Flashing amber
(1 flash per second)
Solid green
Flashing green
(4 flashes per second)
Flashing green
(1 flash per second)
Off
Status
Definition
Solid blue
The drive is being identified by a host application.
Flashing blue
The drive carrier firmware is being updated or requires an update.
Rotating green
Drive activity
Off
No drive activity
Solid white
Do not remove the drive. Removing the drive causes one or more of the logical
drives to fail.
Definition
The drive has failed, or a predictive failure alert has been received for
this drive; it also has been identified by a management application.
A predictive failure alert has been received for this drive. Replace the
drive as soon as possible.
The drive is online and has no activity.
The drive is operating normally and has activity.
The drive is doing one of the following:
•
Rebuilding
•
Performing a RAID migration
•
Performing a strip size migration
•
Performing a capacity expansion
•
Performing a logical drive extension
•
Erasing
•
Spare part activation
The drive is not configured by a RAID controller or a spare drive.
Table Continued
108
Component identification