Hot-Plug Drive Led Definitions - HPE ProLiant DL360 Gen10 User Manual

Hot-plug drive LED definitions

Item LED
1 Locate
2 Activity ring
3 Do not remove
4 Drive status
Status Definition
Solid blue The drive is being identified by a host application.
Flashing blue The drive carrier firmware is being updated or requires
an update.
Rotating green Drive activity.
Off No drive activity.
Solid white Do not remove the drive. Removing the drive causes
one or more of the logical drives to fail.
Off Removing the drive does not cause a logical drive to
fail.
Solid green The drive is a member of one or more logical drives.
The drive is doing one of the following:
Flashing green
• Rebuilding
• Performing a RAID migration
• Performing a strip size migration
• Performing a capacity expansion
• Performing a logical drive extension
• Erasing
• Spare part activation
Flashing amber/ The drive is a member of one or more logical drives
green and predicts the drive will fail.
Flashing amber The drive is not configured and predicts the drive will
fail.
Solid amber The drive has failed.
Off The drive is not configured by a RAID controller or a
spare drive.
Component identification
26