Hot-Plug Drive Led Definitions - HPE ProLiant DL360 Maintenance And Service Manual

Hot-plug drive LED definitions

Hot-plug drive LED definitions
Item Item LED LED Status Status
1 Locate Solid blue
Flashing blue
2 Activity ring Rotating green
Off
3 Do not remove Solid white
Off
4 Drive status Solid green
Flashing green
Flashing
amber/green
Flashing amber
Solid amber
Off
Definition Definition
The drive is being identified by a host
application.
The drive carrier firmware is being updated
or requires an update.
Drive activity.
No drive activity.
Do not remove the drive. Removing the
drive causes one or more of the logical
drives to fail.
Removing the drive does not cause a logical
drive to fail.
The drive is a member of one or more logical
drives.
The drive is doing one of the following:
Rebuilding
Performing a RAID migration
Performing a strip size migration
Performing a capacity expansion
Performing a logical drive extension
Erasing
Spare part activation
The drive is a member of one or more logical
drives and predicts the drive will fail.
The drive is not configured and predicts the
drive will fail.
The drive has failed.
The drive is not configured by a RAID
controller or a spare drive.
Hot-plug drive LED definitions 234