Juniper EX2300 Series Hardware Manual page 87

Cable Specifications
EX Series switches support SFP+ passive DAC cables. The passive Twinax cable is a straight cable with
no active electronic components. EX Series switches support 1 m, 3 m, 5 m, and 7 m long SFP+
passive DAC cables. See
Figure 49: SFP+ Direct Attach Copper Cables for EX Series Switches
The cables are hot-removable and hot-insertable: You can remove and replace them without powering
off the switch or disrupting switch functions. A cable comprises a low-voltage cable assembly that
connects directly into two 10-Gigabit Ethernet ports, one at each end of the cable. The cables use high-
performance integrated duplex serial data links for bidirectional communication and are designed for
data rates of up to 10 Gbps.
List of DAC Cables Supported on EX Series Switches
For the list of DAC cables supported on EX Series switches and the specifications of these cables, see:
• EX2300—Hardware Compatibility Tool page for EX2300
• EX3200—Hardware Compatibility Tool page for EX3200
• EX3300—Hardware Compatibility Tool page for EX3300
• EX3400—Hardware Compatibility Tool page for EX3400
• EX4200—Hardware Compatibility Tool page for EX4200
• EX4300—Hardware Compatibility Tool page for EX4300
• EX4400—Hardware Compatibility Tool page for EX4400
• EX4500—Hardware Compatibility Tool page for EX4500
• EX4550—Hardware Compatibility Tool page for EX4550
• EX4600—Hardware Compatibility Tool page for EX4600
Figure 49 on page 78.
78