Juniper EX2300 Series Hardware Manual page 146

Table 37: Parts Required for Connecting an EX Series Switch to Earth Ground
Switch Earthing
Terminal
Location
EX8208 Left side of
the chassis
EX8216 Two earthing
terminals:
•
Left side
of the
chassis
•
Rear
panel of
the
chassis
NOTE: You
must use
only one of
the two
protective
earthing
terminals.
Grounding Grounding Lug
Cable Specifications
Requirements
6 AWG Panduit LCD2-14A-
(13.3 mm²), Q or equivalent
minimum 90° C —provided
wire, or as
permitted by
the local code
2 AWG Panduit LCD2-14A-
(33.6 mm²), Q or equivalent
minimum 90° C —provided
wire, or as
permitted by
the local code
(Continued)
Screws and Additional
Washers Information
•
Two ¼ -20
x 0.5 in.
screws with
#¼" split-
washer
—provided
•
Two #¼" flat
washers—
provided
•
Two ¼ -20 x
0.5 in.
screws with
#¼" split-
washer
—provided
•
Two #¼" flat
washers—
provided
137