Juniper EX2300 Series Hardware Manual page 222

Table 54: Chassis Viewer for EX8216 Switches
Field Description
LCD panel LCD panel configured for the LEDs on the ports. Mouse over the icon to view the current
character display.
Rear View
SF modules Mouse over the SF module icons in their respective slots to display information. Slots are
numbered SF7–SF0, from left to right.
Table 55: Chassis Viewer for XRE200 External Routing Engines
Field
Front View
Interface status
Console port
Management (me0)
port
(Continued)
Description
In the image, the colors listed below denote the interface status:
•
Green—Interface is up and operational.
•
Yellow—Interface is up but is nonoperational.
•
Gray—Interface is down and nonoperational.
Mouse over the interface (port) to view more information.
For a Virtual Chassis configuration, select the switch to view the interface status.
The console port is used to connect the switch to a management console or to a
console server.
The management port is used to connect the switch to a management device for out-
of-band management. Use this port for initial switch configuration.
213