Juniper EX2300 Series Hardware Manual page 200

Table 41: System Information
Field
Device uptime
Last configured time
Health Status Panel
Table 42: Health Status
Field Description
EX2200, EX2200-C, EX3200, EX3300, EX4200, and EX4300 Switches
Memory util. Indicates the memory used in the Routing Engine. In a Virtual Chassis configuration, the memory
utilization value of the primary Routing Engine is displayed.
NOTE: In EX4300 and EX4600 Virtual Chassis, to display the Routing Engine memory utilization
of the primary or backup, click the respective image. J-Web is supported on EX4600 switches
only in J-Web Application package Release 14.1X53-A2.
Flash Indicates the usage and capacity of internal flash memory and any external USB flash drive.
NOTE: In EX4300 Virtual Chassis, the flash memory utilization of the primary switch is displayed
by default. To display the flash memory utilization along with the internal and external flash
memory utilization details for each switch or line card, mouse over individual switch or line card
images.
In EX4600 Virtual Chassis, to display the flash memory utilization along with the internal and
external flash memory utilization details of each switch or line card mouse over the green-colored
indicator.
(Continued)
Description
Indicates the time since the last reboot. In a Virtual
Chassis configuration, to display the uptime of the
specific switch, click the image of that switch.
NOTE: For EX4650 switches, click the image of the
switch to display the uptime.
Indicates the time when the switch was last
configured.
191