Juniper EX2300 Series Hardware Manual page 118

NOTE: Do not block the vents on the top of EX2300-C switches. Blocking the vents can lead to
overheating of the switch chassis.
Ensure that you have the following parts and tools available:
• 3 desk-mounting screws (M4 x 30 mm or 8-32 x 1.25 in. Phillips pan-head machine screws—not
provided)
• Phillips (+) screwdriver, number 2
• (Optional and separately orderable) 1 cable guard kit. The kit includes the cable guard and
3 number-8 Phillips truss-head screws to secure the cable guard to the switch.
• (Optional and separately orderable) 1 standard cable lock kit to secure the switch from theft by
connecting the cable to the security slot on the switch and a desk or a rack to fasten the cable lock.
The kit includes the standard cable lock and its key.
You can mount an EX2300-C switch under a desk or other level surface by using the mounting slots on
the bottom of the chassis and desk-mounting screws to secure the switch.
To mount the switch under a desk or other level surface by using screws:
1. Remove the switch from the shipping carton (see
2. (Optional) Attach the cable guard to protect cable connections:
a. Use the 3 truss-head screws to attach the cable guard to the bottom of the chassis.
"Unpacking an EX2300 Switch" on page
109
101).