Juniper EX2300 Series Hardware Manual page 223

Table 55: Chassis Viewer for XRE200 External Routing Engines
Field
Virtual Chassis port
LCD panel
Temperature
USB port
PIC1 slot
PIC2 slot
Rear View of the XRE200 External Routing Engine
Fan modules
Power supplies
Description
In the image, the colors listed below denote the Virtual Chassis port (VCP) status:
•
Green—VCP is up and operational.
•
Yellow—VCP is up but is nonoperational.
•
Gray—VCP is down and nonoperational.
Mouse over the interface (port) to view more information.
LCD panel configured for the LEDs on the ports. Mouse over the icon to view the
current character display.
The active slots contain a gray temperature icon. Mouse over the icon to display
temperature information for the slot.
Indicates the USB port for the switch.
NOTE: We recommend that you use USB flash drives purchased from Juniper Networks
for your EX Series switch.
You can install a Virtual Chassis module in the PIC1 slot. Mouse over the Virtual Chassis
ports to display the port status details.
You can install a Virtual Chassis module in the PIC2 slot. Mouse over the Virtual Chassis
ports to display the port status details.
Mouse over the fan modules to display status of the fans and airflow direction
information. For a Virtual Chassis, the status of the fans of the selected member switch
is displayed.
Mouse over the power supply icons to display name, status, and description
information.
(Continued)
214