Juniper EX2300 Series Hardware Manual page 19

2 System LEDs
—
3 10/100/1000 BASE-T Gigabit Ethernet ports
—
with PoE/PoE+ capability
100/1000/2500 BASE-T Gigabit Ethernet
4
—
ports
Rear Panel of an EX2300 Switch
The rear panel of an EX2300-C switch consists of the following components:
• Serial number ID label
• CLEI code label
• One protective earthing terminal
• Heatsink
• One AC power cord inlet
Figure 7 on page 10 shows the rear panel of an EX2300-C switch with 12 Gigabit Ethernet ports with
PoE capability and Figure 8 on page 11
Ethernet ports without PoE capability.
EX2300-C switches being fanless models have no exhaust openings. EX2300 switches have vents on
the top of the chassis. The PoE models have a heatsink installed in the rear panel to dissipate heat, while
non-PoE models have no heatsink.
Figure 7: Rear Panel of an EX2300-C Switch with 12 Gigabit Ethernet Ports with PoE Capability
CLEI code label
1
—
Serial number ID label
2
—
6 Management port
—
7 Console port
—
USB port
8
—
shows the rear panel of an EX2300-C switch with 12 Gigabit
Heatsink—only in PoE models
4
—
AC power cord inlet
5
—
10