Juniper EX2300 Series Hardware Manual page 186

Hide thumbs Also See for EX2300 Series:
Table of Contents

Advertisement

• EX2200, EX3200, or EX4200 switch—Connect the cable to port 0 (ge-0/0/0) on the front panel
of the switch.
• EX3300 switch—Connect the cable to the port labeled MGMT on the rear panel of the switch.
• EX4300 switches except EX4300-48MP and EX4300-48MP-S switches—Connect the cable to
the port labeled MGMT on the rear panel of the switch.
• EX4500 or EX4550 switch—Connect the cable to the port labeled MGMT on the front panel
(LCD panel side) of the switch.
• EX4650 switches—Connect the cable to the port labeled CON on the rear panel of the switch.
• EX6200 switch—Connect the cable to one of the ports labeled MGMT on the Switch Fabric and
Routing Engine (SRE) module in slot 4 or 5 in an EX6210 switch.
• EX8200 switch—Connect the cable to the port labeled MGMT on the Switch Fabric and Routing
Engine (SRE) module in slot SRE0 in an EX8208 switch or on the Routing Engine (RE) module in
slot RE0 in an EX8216 switch.
These ports are configured as the DHCP server with the default IP address, 192.168.1.1. The
switch can assign an IP address to the management PC in the IP address range 192.168.1.2 through
192.168.1.253.
3.
From the PC, open a Web browser, type http:/ /192.168.1.1 in the address field, and press Enter.
4.
On the J-Web login page, type root as the username, leave the password field blank, and click
Login.
5.
On the Introduction page, click Next.
6.
On the Basic Settings page, modify the hostname, the root password, and date and time settings:
• Enter the hostname. This is optional.
• Enter a password and reenter the password.
• Specify the time zone.
• Synchronize the date and time settings of the switch with the management PC or set them
manually by selecting the appropriate option button. This is optional.
Click Next.
7.
Use the Management Options page to select the management scenario:
NOTE: On EX2300 and EX3400 switches, you cannot create a new VLAN for management.
On EX4500, EX6210, and EX8200 switches, only the out-of-band management option is
available.
177

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents