Juniper EX2300 Series Hardware Manual page 134

2. Attach the wall-mounting brackets to the sides of the chassis by using four wall-mounting bracket
screws, as shown in Figure 66 on page
Figure 66: Attaching Wall-Mount Brackets to an EX2300 Switch Except the EX2300-24MP and
EX2300-48MP Models and the EX2300-C Switch
3. Install four mounting screws for the wall-mounting brackets on the wall as shown in
page 126.
NOTE: Figure 67 on page 126
when the switch is viewed from the top. The internal components and top cover are not
shown. The procedure to mount the switch on a wall and the distance between mounting
screws are the same for EX2300 switches with 24 ports with and without PoE capability
though the depth of the chassis of the switches with and without PoE capability are different.
125.
shows an EX2300 switch with 24 ports with PoE capability
125
Figure 67 on