Juniper EX2300 Series Hardware Manual page 195

Table 39: Details of a Virtual Chassis Member Switch
Details
Model number of the member switch
Assigned ID that applies to the entire Virtual
Chassis configuration
Role of the member switch
Status of the member switch
The status of the member switch is displayed on the image of the switch. If the member switch appears
dimmed, it means the switch is not present, is inactive, or is not provisioned in the Virtual Chassis. If the
member switch does not appear dimmed, it means the switch is present and is active.
Table 40 on page 186 describes the possible status of a member switch.
Table 40: Status of a Member Switch in a Virtual Chassis
If the member switch is
Present
Not present
Inactive
Example
EX3300
ID 2
NOTE: If the member switch is not provisioned, the serial
number of the switch is displayed instead of its ID.
Master
Possible roles are: Master, Backup, or Linecard
Prsnt
Possible statuses are: Prsnt, NotPrsnt, Inactive, or Unprvsnd
It appears as It means the member switch
Prsnt Has established physical and logical connections with Virtual Chassis
member switches.
dimmed and Has been disconnected from the existing Virtual Chassis.
NotPrsnt
dimmed and Has established physical connections, but is unable to establish logical
connections.
Inactive
186