Juniper EX2300 Series Hardware Manual page 198

Table 41: System Information
Field
Inventory details
(Continued)
Description
Indicates the following:
•
•
•
•
•
•
For EX3200 switches; and for EX2200, EX2200-C,
EX3300, EX4200, EX4300, EX4500, EX4550, and
EX4600 switches that are not configured as Virtual
Chassis, the value displayed in Inventory details
field is always 1 FPC. FPC is a legacy term for a slot
in a large Juniper Networks chassis; which simply
refers to the standalone switch.
For EX2200 and EX2200-C switches configured as
a Virtual Chassis, the value displayed in the
Inventory details field is 1–4 FPC, with the number
corresponding to the number of member switches.
For EX3300 switches configured as a Virtual
Chassis, the value displayed in the Inventory details
field is 1–6 FPC, with the number corresponding to
the number of member switches.
NOTE: For Junos OS Release 14.1X53-D10 and
later, EX3300 switches configured as a Virtual
Chassis display the value 1–10 FPC in the
Inventory details field.
For EX4200, EX4500, EX4550, and EX4600
switches configured as a Virtual Chassis, the value
displayed in the Inventory details field is 1–10 FPC,
with the number corresponding to the number of
member switches.
For EX4650 switches, the value displayed in
Inventory details field is equal to the number of
FPCs.
For EX6210 switches, the values displayed in the
Inventory details field are 1–2 CB and 1–9 FPC. CB,
or Control Board, refers to the SRE module. FPC
refers to line cards and the FPC within the CB.
189