Juniper EX2300 Series Hardware Manual page 138

b. Use the thumbscrews to tighten or loosen the cable guard so that you can insert cables. See
Figure 69 on page
Figure 69: Attaching a Cable Guard to an EX2300-C Switch
Cable guard
1
—
4. Attach the self adhesive rubber pads provided with the magnet-mount kit to the bottom of the
switch as shown in Figure 70 on page
Figure 70: Attaching Rubber Pads to an EX2300-C Switch
129.
129.
Thumb screws
2
—
129