Juniper EX2300 Series Hardware Manual page 221

Table 54: Chassis Viewer for EX8216 Switches
Field Description
Interface status In the image, click any line card or RE module to display the front view of the selected
component. In the image, the colors listed below denote the interface status:
•
Green—Interface is up and operational.
•
Yellow—Interface is up but is nonoperational.
•
Gray—Interface is down and nonoperational.
Mouse over the interface (port) to view more information.
You can view status for the following ports on the RE module:
•
USB port—Indicates the USB port for the switch.
NOTE: We recommend that you use USB flash drives purchased from Juniper Networks for
your EX Series switch.
•
Auxiliary port—This port is unavailable.
•
Management (me0) port—The management port is used to connect the switch to a
management device for out-of-band management.
•
Console port—The console port is used to connect the switch to a management console or
to a console server. (You might do this for initial switch configuration.)
Slot numbers Slots on the switch are labeled, from the top of the switch down:
•
RE0 (RE module)
•
RE1 (RE module)
•
0–15 (line cards)
Temperature The active slots contain a gray temperature icon. Mouse over the icon to display temperature
information for the slot.
Fan status Mouse over the fan tray icon to display consolidated information about the fans.
Power supplies Mouse over the power supply icons to display name, status, and description information.
(Continued)
212