Juniper EX2300 Series Hardware Manual page 47

Table 12: Status LED on the Uplink Ports in EX2300 Switches Except the EX2300-24MP and
EX2300-48MP Models
LED
Status LED
On EX2300 switches except the EX2300-24MP and EX2300-48MP models, you can tell which port
parameter is indicated by the Status LED on RJ-45 network ports and uplink ports by issuing the
operational mode command
Each RJ-45 network port and uplink port on the front panel of EX2300-24MP and EX2300-48MP
switch models has one LED that indicates link/activity. See
38, Figure 30 on page 39, and
Figure 28: LED on RJ-45 Network Ports in EX2300-24MP Switches
1 LED on RJ-45 ports
—
Figure 29: LED on RJ-45 Network Ports in EX2300-48MP Switches
State and Description
Indicates the speed and administrative status. The indicators are:
•
On steadily—10 Gbps
•
Blinking—1 Gbps
•
Unlit—The port is administratively disabled or the link is down.
.
show chassis led
Figure 31 on page 39.
Figure 28 on page 38, Figure 29 on page
38