Juniper EX2300 Series Hardware Manual page 5

Installing and Connecting an EX2300 Switch | 104
Mounting an EX2300 Switch | 105
Mounting an EX2300 Switch on a Desk or Other Level Surface | 106
Mounting an EX2300-C Switch Under a Desk or Other Level Surface by Using Screws | 108
Mounting an EX2300 Switch on Two Posts of a Rack or Cabinet | 113
Mounting an EX2300 Switch on Four Posts of a Rack or Cabinet | 116
Mounting an EX2300 Switch on a Wall | 119
Mounting an EX2300-C Switch on a Wall | 119
Mounting an EX2300 Switch Except the EX2300-C Switch and the EX2300-24MP and
EX2300-48MP Models on a Wall | 124
Mounting an EX2300-C Switch on or Under a Surface Made of Ferrous Material | 127
Mounting an EX2300 Switch in a Recessed Position in a Rack or Cabinet | 132
Connecting the EX2300 to Power | 132
Connect Earth Ground to an EX Series Switch | 132
Connecting AC Power to an EX2300 Switch | 141
Connecting DC Power to an EX2300 Switch | 144
Connecting the EX2300 to External Devices | 147
Connect a Device to a Network for Out-of-Band Management | 147
Connect a Device to a Management Console Using an RJ-45 Connector | 148
Connect an EX Series Switch to a Management Console Using the Mini-USB Type-B Console
Port | 149
Connecting the EX2300 to the Network | 151
Install a Transceiver | 151
Connect a Fiber-Optic Cable | 154
Configuring Junos OS on the EX2300 | 155
EX2300 Switch Default Configuration | 156
Connecting and Configuring an EX Series Switch (CLI Procedure) | 171
Connecting and Configuring an EX Series Switch (J-Web Procedure) | 175
v