Unregistering Robot; Robot Cyber Security; Cyber Security Pre-Requisites - Universal Robots E Series Original Instructions Manual

17.7.3. Unregistering Robot

A new license is required if the robot changes owners. In this case, the robot must first be
unregistered.
1. In the Header, tap the Hamburger Menu and select Settings.
2. In the menu on the left, tap System and select Robot Registration.
3. On the bottom right of the Settings screen, tap Unregister.

17.8. Robot Cyber Security

Before implementing cyber security, you must conduct a risk assessment to:
• Identify threats
• Define trust zones and conduits
• Specify the requirements of each component in the application.

17.8.1. Cyber Security Pre-requisites

Before your system can reach a secure state of operation, ensure the following:
• You have a thourough understanding of general cyber security principles and advanced
technologies as used in your Universal Robots robot.
• You take physical security measures to allow only trusted personnel physical access to the
UR5e 108
17. Introduction
User Manual