Intended Use - Universal Robots E Series Original Instructions Manual

2. Safety
17. Make sure the users of the robot are informed of the location of the
emergency stop button(s) and are instructed to activate the emergency stop
in case of emergency or abnormal situations.
WARNING
1. The robot and its controller box generate heat during operation. Do not
handle or touch the robot while in operation or immediately after operation
as prolonged contact can cause discomfort. You can check the temperature
on the log screen before handling or touching the robot, or you can cool
down the robot by powering it off and waiting one hour.
2. Never stick fingers behind the internal cover of the controller box.
CAUTION
1. When the robot is combined, or working, with machines capable of damaging
the robot, it is highly recommended to test all functions and the robot
program separately.
2. Do not expose the robot to permanent magnetic fields. Very strong magnetic
fields can damage the robot.

2.6. Intended Use

Universal Robots e-Series are industrial robots intended to handle tools/end effectors and
fixtures, or to process or transfer components or products. For details about the
environmental conditions under which the robot should operate, see appendices and .
Universal Robots e-Series are equipped with special safety functions, which are purposely
designed to enable collaborative operation, where the robot system operates without
fences and/or together with a human.
Collaborative operation is only intended for non-hazardous applications, where the
complete application, including tool/end effector, work piece, obstacles and other
machines, is without any significant hazards according to the risk assessment of the
specific application.
Any use or application deviating from intended use is deemed to be impermissible
misuse. This includes, but is not limited to:
User Manual 11 UR5e