Led; Bmc Network - Inspur NF8260M5 User Manual

timeout is more than 1 minute, BMC will reset.
When entering the flash mode, set watchdog time to 20 mins, if timeout BMC will reset

automatically. When flashing image starts, the watchdog will update to 20 mins, if timeout
BMC will reset automatically.
8.12.2 Software Watchdog
BMC regularly detects the working status of internal services. When the progress is
abnormal, BMC will restart the corresponding service:
IPMI Server

KVM Server

Virtual Media Server


8.13 LED

The system provides LEDs to indicate the health of the system.
Table 8-28 LEDs Indicating the Health of the System
LED name
SYS LED
SYS LED
SYS LED
Power LED
Power LED
BMC Heartbeat
BMC Heartbeat
DIMM Error
PSU Error
FAN Error
CPU Hot

8.14 BMC Network

8.14.1 LAN Interface
BMC usually supports an LAN controller dedicated to BMC and an LAN controller shared for
Color Status Description
1.When system is off, SYS LED is OFF.
Red OFF
2.System works fine, SYS LED is OFF.
The following CPU events occur:
1. CPU IERR
Red ON
2. CPU Thermal Trip
3.
The following warning about CPU appears:
Red BLINK
Processor Automatically Throttled
Yellow ON Power plugged in, but not powered on
1. Power on
Green ON
2. Power button is pressed
Green BLINK BMC status OK
Green ON/OFF BMC error
Red ON DIMM ECC or uncorrectable ECC occurred
Red ON PSU sensors error
Red ON Fan sensors error
Red ON CPU Proc Hot PIN detected
PCIE Error
BMC Settings
143