Logging In To The Configuration Screen - Inspur OS Installation Manual

For the RAID array configuration of different RAID controller cards, please refer
to the corresponding Inspur server RAID controller card configuration manuals.

5.3.1 Logging in to the Configuration Screen

Logging in to the RAID configuration screen requires a server restart, which will
cause business interruption.
Procedure:
1. Restart the server.
Log in to the target server remotely via the BMC Web GUI, select Power Supply >
Power Control > Forced System Reset, and click Perform Action to restart the
server, as shown below.
Figure 5-7 Server Restart
2. Configure the UEFI boot options in the BIOS.
a. On the BMC Web GUI, connect to the server remotely by selecting either of
H5Viewer and JViewer in Remote Control > Console Redirection.
If you select H5Viewer, you need to use Chrome 58/IE 11 or above versions.

55