Disassembly/Reassembly Process; Access Panel Replacement - Inspur NF5280M6 User Manual

Figure 4-1 Removing the Server from the Rack
5. After performing installation or maintenance, slide the server all the way back
into the rack and secure it in place.

4.4 Disassembly/Reassembly Process

•
Before installation or removal of any hardware, always ensure all data is
backed up properly.
•
Disconnect the server and all attached devices from their electrical
outlets.
•
There is no need to remove power from the server when replacing
hot-swap components.
•
If more than one option is to be installed, read the installation
instructions for all the hardware options and identify similar steps to
streamline the installation process.
Item appearance may be different on actual models.

4.4.1 Access Panel Replacement

26