Chapter Three System Setup Chapter Three System Setup; Main Board Bios Setup - Inspur NF5220 Manual

Chapter Three System Setup Chapter Three System Setup
In this chapter, the wire jumper of motherboard and BIOS function setup of this
server are introduced. Only operator or manager with qualifi cation of system mainte-
nance can implement these operations described in this part.

3.1 Main Board BIOS Setup

3.1 Main Board BIOS Setup
BIOS is a basic input and output system. With some special setting programs, it
can adjust the system parameter and the hard disk parameter. As BIOS has great infl u-
ence on the starting and running of the system, setting parameters improperly may
cause the conflict among hardware resources, or affect the system's performance.
Hence understanding the BIOS setup is signifi cant to the confi guration of your server.
If there is no special requirement, we suggest you using the default value and not alter-
ing the parameters.
1. Before the server BIOS setup is altered, please record the corresponding origi-
nal setup. Hence when there are operating problems in the system due to the alteration,
the setup can be reversed.
2. The factory default system value is usually the optimized setup. Do not try to
alter the parameters before you understand their denotations.
3. The common setup is introduced in detail in this chapter. For items less used in
the application, this chapter only offers simple instruction or just omits the instruction.
The less referred options in the application procedure are explained simply or not
mentioned.
4. The contents of the BIOS may be different based on the different confi gurations
of the products; hence the detailed introduction is elided.
3.1.1 How to Enter the BIOS Setup 3.1.1 How to Enter the BIOS Setup
Power up and start the server. When "Press <DEL> to SETUP or <TAB> to
POST" appears at the bottom of the screen, please press <DEL> key. The system will
enter BIOS setup.
If the system does not enter BIOS setup after previous steps, please press
<Ctrl><Alt>and<Del> at the same time to reset the system and repeat the previous
steps. (if the prompt displays to press <DEL> again, please press it quickly.)
Chapter Three System Setup Chapter Three System Setup
11