Predelivery Checklist - MacDon M1 Series Unloading And Assembly Instructions

Predelivery Checklist

Perform these checks and adjustments prior to delivery to your Customer. Complete this checklist and provide it to the
Dealer or the Operator.
CAUTION
Carefully follow the instructions given. Be alert for safety related messages that bring your attention to hazards and
unsafe practices.
Windrower Serial Number:
M1 Series Predelivery Checklist
ü ü Item
Check for shipping damage or missing parts. Be sure all
shipping dunnage is removed.
Check for loose hardware. Tighten to required torque.
Check tire air pressures and adjust as required.
Check wheel drive hub lubricant level.
Check engine coolant level and strength at pressurized
coolant tank.
Check air cleaner and clamps.
Check engine oil level and check for leaks.
Check hydraulic oil level and check for leaks along lines.
Check fuel separator for water and foreign material, drain
and clean as necessary, and add fuel.
Check gearbox lubricant level.
Check tension of A/C compressor belt.
Check that machine is completely lubricated.
Check Operator's Presence System.
Check horn operation.
Start engine and run to operating temperature.
Check HPT, fuel, and diesel exhaust fluid (DEF) gauges for
operation.
Check engine speed on HPT.
Ensure selective catalytic reduction (SCR) conditioning inhibit
is off.
Check that air conditioning and heater are functioning
properly.
Check that interior lights are functioning properly.
Check that exterior lights are functioning properly.
215620
Engine Serial Number:
Reference
6.3 Torque Specifications, page 240
4.1.13 Checking Tire Pressure, page 108
4.1.11 Checking and Adding Wheel Drive Lubricant –
10 Bolt Wheels, page 107
4.1.5 Checking Engine Coolant Level, page 99
4.1.2 Checking Engine Air Intake, page 96
4.1.6 Checking and Adding Engine Oil, page 99
4.1.3 Checking and Adding Hydraulic Oil, page 97
4.1.4 Checking Fuel Separator, page 98
4.1.7 Checking Engine Gearbox Lubricant Level and
Adding Lubricant – M1170, page 101
Checking Engine Gearbox Lubricant Level and
Adding Lubricant – M1240, page 102
4.1.9 Checking Air Conditioning Compressor Belts,
page 103
3.16.2 Lubrication Points, page 90
4.2.1 Checking Operating Safety System, page 111
4.2.6 Checking Horn, page 123
4.1.10 Starting Engine – M1240 Windrower, page
104
4.2.2 Checking Harvest Performance Tracker Display
Gauges, page 112
4.2.3 Checking Engine Speed, page 118
4.2.4 Checking Selective Catalytic Regeneration
Conditioning Mode, page 119
4.2.8 Checking Climate Controls, page 124
4.2.7 Checking Interior Lights, page 124
4.2.5 Checking Exterior Lights, page 120
251
—
or 4.1.8
Revision A