MacDon M1 Series Unloading And Assembly Instructions page 228

6. Connect main header harness (A) to adapter harness (B).
7. If you are connecting the standard-configuration R2
header equipped with the optional electric baffle control
kit: Connect electric baffle control harness (C) to adapter
harness (D).
8. If you are connecting an R2 header configured for grass-
seed harvesting: Connect actuator harness (C) to adapter
harness (D).
9. Push latch (A) to unlock platform (B).
10. Pull platform (A) towards the cab until it stops and the latch
is engaged.
215620
ATTACHING A HEADER TO THE WINDROWER
216
Figure 5.219: Electrical Harness Connection at
Center-Link
Figure 5.220: Left Cab-Forward Platform
Figure 5.221: Left Cab-Forward Platform
Revision A