MacDon M1 Series Unloading And Assembly Instructions page 68

17. Remove four M24 bolts (A) securing left caster wheel
beam (B) to shipping stand. Retain M24 bolts with washers
for installation.
18. Lift left caster wheel away from shipping assembly and set
it down on a non-scratch surface.
19. Repeat Step 6, page 54
caster wheel.
NOTE:
It may be necessary to raise the left end of walking beam
with a jack when installing the left caster wheel.
20. On left anti-shimmy dampener bracket, rotate slow moving
vehicle (SMV) sign bracket (A) into working position. Secure
with existing screws (B).
21. Ensure left and right caster wheel width is equal.
215620
ASSEMBLING WINDROWER
to Step 15, page 55 to install left
Figure 3.27: Caster Wheels Shipping Assembly
Figure 3.28: SMV Bracket in Working Position
Figure 3.29: Walking Beam Adjustment
56
Revision A