MacDon M1 Series Unloading And Assembly Instructions page 190

20. Start the engine and press HEADER DOWN switch (A) on
the GSL to fully lower the header.
21. Shut down the engine, and remove the key from
the ignition.
22. If you are not prompted by the HPT display to restore the
header float, restore the header float manually:
a. Press rotary scroll knob (A) on the Harvest Performance
Tracker (HPT) to highlight the QuickMenu options.
b. Rotate scroll knob (A) to highlight Header Float
icon (B), and press the scroll knob to select it. The float
setting page appears.
23. Press soft key 3 (A) to restore the header float.
NOTE:
If the header float is active, the icon at soft key 3 displays
Remove Float; if the header float has been removed, the
icon displays Resume Float.
24. Shut down the engine, and remove the key from
the ignition.
215620
ATTACHING A HEADER TO THE WINDROWER
178
Figure 5.125: GSL
Figure 5.126: HPT Display
Figure 5.127: HPT Display
Revision A