MacDon M1 Series Unloading And Assembly Instructions page 76

6. Reinstall platform adjuster bolt (A) through gusset (B) on
the left frame member.
7. Use the existing hardware to connect platform linkage (A)
to hole in the platform. Ensure bushing (B) remains in the
linkage hole; nut (C) is installed below the platform. Torque
nut to 14.5 Nm (11 lbf·ft).
8. Use the existing hardware to mount door stop (A) onto the
left platform. Insert bolt (B) from the top and torque nut (C)
to 28.5 Nm (21 lbf·ft).
215620
ASSEMBLING WINDROWER
Figure 3.44: Left Platform Bracket
Figure 3.45: Linkage Below Platform
Figure 3.46: Platform Door Stop
64
Revision A