Detaching D1X Or D1Xl Series Draper Header - MacDon M1 Series Unloading And Assembly Instructions
Windrowers
Hide thumbs
Also See for M1 Series:
- Software update instructions (52 pages) ,
- Unloading and assembly instructions (204 pages)
Table of Contents
Advertisement
16. Pull platform (A) towards the cab until it stops and the latch
is engaged.
5.2.4 Detaching D1X or D1XL Series Draper Header
DANGER
To prevent bodily injury or death from the unexpected startup of the machine, always stop the engine and remove the
key from the ignition before leaving the operator's seat for any reason.
1. Lower the header fully.
2. Shut down the engine, and remove the key from the ignition.
3. Approach platform (A) on the left cab-forward side of the
windrower and ensure the cab door is closed.
4. Push latch (B), and pull platform (A) toward the walking
beam until it stops and the latch engages.
215620
ATTACHING A HEADER TO THE WINDROWER
155
Figure 5.65: Left Cab-Forward Platform
Figure 5.66: Left Cab-Forward Platform
Revision A
Advertisement
Table of Contents
