MacDon M1 Series Unloading And Assembly Instructions page 59

3. Support fork channel (A) with a suitable lifting device (B),
and remove two bolts (C) from the walking beam.
4. Remove bolt (A) from the forward end of fork channel (B)
at the side of the machine.
5. Ensure the hoses and electrical harnesses do not catch the
lower fork channel, and move it away from the windrower.
6. Repeat on the opposite side.
215620
ASSEMBLING WINDROWER
Figure 3.5: Supporting Fork Channel
Figure 3.6: Fork Channel
47
Revision A