Rotary Disc Only Configuration - Quick Coupler Connections - MacDon M1 Series Unloading And Assembly Instructions

Rotary Disc Only Configuration – Quick Coupler Connections
The rotary disc configuration allows the windrower to operate with compatible rotary disc headers. Attaching the header's
hydraulic connections to the windrower's ports using quick couplers does not require any additional tools or hardware.
1. Remove extension fittings and elbows (A) from the rotary
disc header's hydraulic pressure and return connections.
2. Remove and retain the extra hydraulic quick couplers from
pressure hose (A) and return hose (B).
3. Install the male quick coupler at windrower pressure
receptacle (A).
4. Install the female quick coupler at windrower return
receptacle (B).
215620
ATTACHING A HEADER TO THE WINDROWER
188
Figure 5.149: Hard Plumbed Connections – Rotary
Disc Ready Windrower
Figure 5.150: Hydraulic Quick Couplers
Figure 5.151: Quick Couplers on Rotary Disc Ready
Windrower
Revision A