MacDon M1 Series Unloading And Assembly Instructions page 46

8. Remove two bolts (A) securing the shipping assembly to the
front horizontal brace.
9. Remove two bolts (B) securing the shipping assembly to the
vertical side braces.
10. Before lifting, have a second person guide the assembly to
avoid contact with the windrower.
11. Slowly lift the fuel tank shipping assembly (C) away from
the windrower. Avoid snagging handrail (A) on wheel leg
assemblies (B).
12. With the fuel tank shipping assembly suspended off the
ground, support handrail (A), remove and retain
hardware (B), and then set the handrail aside. Keep the
hardware with the handrail for installation.
13. Lower the fuel tank shipping assembly down onto 152 mm
(6 in.) blocks to prevent damage.
215620
UNLOADING WINDROWER
Figure 2.23: Fuel Tank Shipping Assembly
Figure 2.24: Handrail and Wheel Legs
Figure 2.25: Handrail under Fuel Tank Shipping
Assembly
34
Revision A