MacDon M1 Series Unloading And Assembly Instructions page 81

7. From below the right platform assembly, remove and
discard three bolts and nuts (A) and (B), and remove the
horizontal shipping channel.
8. Remove bolt and nut (C), and retain for installation.
9. On the right chassis frame member, remove two bolts (A)
and remove hose cover (B).
10. Loosen two bolts (A) securing the hose brackets and move
the hoses away from platform mounting bolt (B).
11. Remove platform mounting bolt (B) and retain for
installation.
215620
ASSEMBLING WINDROWER
Figure 3.54: Right Platform Shipping Brackets
Figure 3.55: DEF Hose Cover
Figure 3.56: Hose Clamps on Right Frame
69
Revision A