MacDon M1 Series Unloading And Assembly Instructions page 222

3. Ensure that hose (A) is disconnected from windrower
receptacle (B) and placed in storage cup (C) on the
multicoupler.
4. Connect the hydraulic fittings to the hydraulic hoses as
follows:
NOTE:
The two quick couplers and two elbow fittings are supplied
in the Quick Coupler kit (MD #B6277).
a. Attach 90° elbow fitting (A) and 1 in. female coupler
fitting (B) to disc pressure hose (C).
b. Attach 90° elbow fitting (A) and 1 in. male coupler
fitting (D) to disc return hose (E).
215620
ATTACHING A HEADER TO THE WINDROWER
210
Figure 5.206: Couplers – Auger/Rotary Disc/Draper-
Ready Configuration
Figure 5.207: Header Hydraulic Fittings
Revision A