MacDon M1 Series Unloading And Assembly Instructions page 133

5. Press ROAD LIGHT switch (A) and check that front road
lights (B) and rear red tail/brake lights (C) are functioning.
6. Press HIGH/LOW switch (D) and check lights (B).
7. Press TURN SIGNAL switches (E) on the console and check
amber lights (F).
8. Press HAZARD LIGHT switch (G) and check flashing hazard
lights (F).
9. Press the switches to shut off the lights.
215620
PERFORMING PREDELIVERY CHECKS
Figure 4.51: Road Lights – Cab-Forward
121
Revision A