Adjusting Header Settings On Harvest Performance Tracker - MacDon M1 Series Unloading And Assembly Instructions

5.6 Adjusting Header Settings on Harvest Performance Tracker

Before operating the header, ensure that the Harvest Performance Tracker (HPT) settings are appropriate for your header.
1. Navigate to the SETTINGS menu using soft key 5 and the
HPT scroll knob. For instructions, refer to
Harvest Performance Tracker, page
2. Scroll to SET-UP HEADER option (A) and press the scroll
knob to select it.
NOTE:
The settings displayed will vary depending on the type of
header attached to the windrower.
3. Scroll to highlight the appropriate option and press the
scroll knob to select it.
For example, if a draper header is attached, and
ATTACHMENTS (B) is selected, the available choice is
DOUBLE DRAPER DRIVE.
215620
ATTACHING A HEADER TO THE WINDROWER
Navigating the
113.
229
Figure 5.249: Header Settings
Revision A