MacDon M1 Series Unloading And Assembly Instructions page 170

16. Pivot hose management system (B) forward with
handle (A), and engage hook (D) into latch (C) on header.
17. Remove the header leg pin (B) by removing the hairpin (A)
from header leg on both sides.
18. Lower header stand (D) by pulling spring loaded pin (C).
Release spring pin to lock stand.
19. Windrowers with self-aligning center-link: Release center-
link latch (A) before returning to the cab.
215620
ATTACHING A HEADER TO THE WINDROWER
158
Figure 5.73: Hydraulic Hose Management System
Figure 5.74: Header Stand
Figure 5.75: Center-Link
Revision A