Using Transpector Web Ui; Introduction; What Is Transpector Web Ui - Inficon Transpector MPH Operating Manual

Chapter 5

Using Transpector Web UI

5.1 Introduction

Transpector MPH includes Transpector Web UI, an onboard, browser-based
user interface (UI) that provides remote Transpector MPH control and monitoring
from network connected devices.
This chapter will discuss the purpose of the requirements for running and
instructions for operating Transpector Web UI.

5.1.1 What is Transpector Web UI

Transpector Web UI:
 displays data in a spectrum window
 can perform leak checking when the computer that controls Transpector MPH
is located away from Transpector MPH
 provides a diagnostic window that displays instrument status and errors
Transpector Web UI should be used in parallel with a program from the
FabGuard Suite.
NOTE: Transpector Web UI does not allow for saving data. It is a remote
5 - 1
monitoring and diagnostic tool. For data saving, selected peaks mode or
trend graphs, a full software program must be used.
Transpector MPH Operating Manual