Startup & Setup; About; Instrument Settings - Interacoustics AD528 Instructions For Use Manual

23 Incorrect/Down
24 Correct/Up
25 Wheel
Sync
3.2 Startup & Setup
The AD528 will always start up in the pure tone audiometry test screen. A setting can be saved permanently
by pressing save or temporarily by pressing back when leaving the setup menu.

About

Shift+Setup opens the About box that provides information about the firmware version, calibration and
standards. In addition, it states which transducers the device is calibrated with and the license configuration
for the device.

Instrument settings

Instrument settings contains all the general. Hold the setup button and select Instrument settings by rotating
the wheel. From instruments settings License, Language, Backlight, Keyboard LED, Printer, Keep session
on save, and date and time can be adjusted. Use the left wheel to go up and down in the list and change the
setting using the right wheel.
License
Language
Backlight
Keyboard LED´s
Printer
Keep session on save
Time & Date
Keep session on save will keep the session on the device when pressing save session.
Printer let you select which printer to print from. By default, the HM-E300 thermal printer is selected. The list
below shows the printers and printer language supported.
D-0121151-B – 2018/11
AD528 - Instructions for Use - EN
Incorrect is used during speech audiometry for storing an incorrect word. Down
is used to decrease in frequency during audiometry.
Correct is used during speech audiometry for storing a correct word.
Up is used to increase in frequency during audiometry.
Masking is turned off by turning the wheel all the way counter clockwise
The masking can be turned off from a loud intensity by pressing shift + turning
the masking wheel counter clockwise.
Shift + turning masking wheel clockwise will enable sync. Turning masking off
will disable sync again. When the channels are in sync a small icon will indicate
it in the display.
Displays license key e.g. 01B5W4UXN7Y8DKTF134BH3D
Chinese, Czech, English, Finnish, French, German, Greek, Italian, Japanese,
Korean, Norwegian, Polish, Brazilian Portuguese, Russian, Spanish, Turkish
10%-100%
10%-100%
HM-E300, HP PCL3, HP PCL3GUI
On/off
Date, Date format, Time, Time format
Page 14