Instrument Tray (Option) - Zeiss S7 / OPMI VISU 160 Instructions For Use Manual

System Overview

Instrument tray (option)

NOTE
Page 82
The S7 floor stand can be equipped or retrofitted with an instrument tray (1).
In the case of retrofitting, our service staff or an authorized person will mount
the instrument tray on your stand.
The maximum load on instrument tray (1) must not exceed 13 kg! The tray has
been designed, for example, for mounting MediLive Trio from Zeiss:
– MediLive Trio is secured on the instrument tray using two stud bolts.
– A second MediLive Trio or other accessory equipment can be mounted on
the instrument tray using the strap provided. Please note the instrument
tray's maximum load capacity of 13 kg.
Risk of injury caused by non-observance of the following information!
• Do not place a load of more than 13 kg on instrument tray (1).
• Make sure that the accessory equipment is positioned as securely as pos-
sible on the instrument tray.
• Mount MediLive Trio on the instrument tray using the two stud bolts.
• If required, secure further accessory equipment on the tray using the
strap provided.
• Remember there is a risk of collision and crushing when suspension arm
(2) is folded to its moving position. A "Risk of crushing" warning label is
therefore attached on the left and right of suspension arm (2).
• Please read the relevant Instructions for Use before starting up the acces-
sory equipment.
• Never pull or push at the accessory equipment (3) in order to move the
floor stand. Always use only the grab handle (4) to move the floor stand.
S7 / OPMI VISU 160
Version 6.0
G-30-1528-en